Join or Login
Global Slider
Moba Blogs

Private
Blogs

  The newest module in the HMImc Family is a joystick module with additional features. Immediately available you can optionally add up to two push buttons on the joystick module. In addition, we added a Z-function. This Z-function can for example be used
sebastian_schlesies 28.11.2017 0 122

  I am being shown around the production area of a Lifter company. I am especially interested in the initial operation department. In which we are going to watch a full system integration of our products. It’s a formidable sight, when a CAN-Bus starts and
sebastian_schlesies 14.07.2017 0 609

Almost 12 years ago, MOBA was one of the first companies to buy a 3D printer. Back then, the printer was pretty basic. Nonetheless, it remained an innovative, helpful tool for the validation of mechanical parts. It improved our inhouse daily work a lot. Th
sebastian_schlesies 07.07.2017 0 685

Until the end of 2016, MOBA sold 23.867 MRWs. This would make a pile, which is even higher than the highest mountain in Germany, the Zugspitze. Numbers are rising. The Moment compensating Redundant Weigh Cell thus is the most successful load limitation sol
sebastian_schlesies 28.06.2017 0 431

  The first day at the APEX Show - just amazing. Join us at our indoor stand no. 170. I'm looking forward to see you!    
sebastian_schlesies 02.05.2017 2 435

    The most important button on every HMI is the emergency stop. The obvious reason is that once the emergency stop is hit, the machine stops and moves into a safe state. But when and how do you operate an emergency stop? An emergency stop is in ge
sebastian_schlesies 06.03.2017 0 458

At the beginning of each new project, in which the MRW is used, there always remains the question of how to install the MRW. Factors, such as the maximum weight of the cage or the general place conditions need to be considered in detail in order to achieve
sebastian_schlesies 29.07.2016 0 561

Boris Zils, MOBA Product Manager for Safety Applications, recently wrote a blog post: "Do you need somebody?" describing the functionality of the DSM Dual-Sonic Meter system. This blog post covers how the Dual-Sonic-Meter 500 system is measuring th
sebastian_schlesies 12.01.2016 0 1931

The IRC-100 is a handset to do a ‘Zero’ - calibration of the MSS sensor at the machine. Most of the MSS sensors use CANopen protocol and it is possible to calibrate the sensor at the machine via CANbus. In this case, the IRC-100 is not a “must have”. But n
sebastian_schlesies 07.12.2015 0 517

Today, telescopic handlers or wheel loaders with working cages are common at job sites. These machines have gained more and more popularity due to their flexible application. By using a working cage on an aerial work platform, safety standards like EN-280
sebastian_schlesies 07.12.2015 0 1753
1
Recommend
Youtube Block

Watch our instructional
Video On Moba Corporation

Moba Corporation Video